Articles publiés en 2013 (Références : Web of Sciences & Scopus)

  1. Boufarguine, M., Guinault, A., Miquelard-Garnier, G., & Sollogoub, C. (2013). PLA/PHBV films with improved mechanical and gas barrier properties. Macromolecular Materials and Engineering, 298(10), 1065-1073.
  2. Crespy, C., Villate, D., Soscia, M., Coste, F., Andre, R. (2013). RLCYC 75 A 2 kW electrically calibrated laser calorimeter designed for Laser MegaJoule diagnostics calibration Metrologia, 50 (1),  37-48.
  3. Diani, J., Gilormini, P., Merckel, Y., & Vion-Loisel, F. (2013). Micromechanical modeling of the linear viscoelasticity of carbon-black filled styrene butadiene rubbers: The role of the filler-rubber interphase. Mechanics of Materials, 59, 65-72.
  4. Diani, J., Merckel, Y., Brieu, M., Caillard, J. (2013). Comparison of stress-softenings in carbon-black filled natural rubber and styrene-butadiene rubber. Rubber Chemistry and Technology, 86 (4),  572-578.
  5. Djouani, F., Zahra, Y., Fayolle, B., Kuntz, M., & Verdu, J. (2013). Degradation of epoxy coatings under gamma irradiation. Radiation Physics and Chemistry, 82(1), 54-62.
  6. Domenek, S., Louaifi, A., Guinault, A., & Baumberger, S. (2013). Potential of lignins as antioxidant additive in active biodegradable packaging materials. Journal of Polymers and the Environment, 21(3), 692-701.
  7. Ecault, R., Berthe, L., Boustie, M., Touchard, F., Lescoute, E., Sollier, A., Benier, J. (2013). Observation of the shock wave propagation induced by a high-power laser irradiation into an epoxy material. Journal of Physics D: Applied Physics, 46(23)
  8. Ecault, R., Boustie, M., Touchard, F., Pons, F., Berthe, L., Chocinski-Arnault, L., Bockenheimer, C. (2013). A study of composite material damage induced by laser shock waves. Composites Part A: Applied Science and Manufacturing, 53, 54-64.
  9. Ege, K., Boutillon, X., & Rébillat, M. (2013). Vibroacoustics of the piano soundboard: (non)linearity and modal properties in the low- and mid-frequency ranges. Journal of Sound and Vibration, 332(5), 1288-1305.
  10. El-Mazry, C., Ben Hassine, M., Correc, O., & Colin, X. (2013). Thermal oxidation kinetics of additive free polyamide 6-6. Polymer Degradation and Stability, 98(1), 22-36.
  11. Espino-Pérez, E., Bras, J., Ducruet, V., Guinault, A., Dufresne, A., & Domenek, S. (2013). Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites. European Polymer Journal, 49(10), 3144-3154.
  12. Farzaneh, S., Fitoussi, J., Lucas, A., Bocquet, M., & Tcharkhtchi, A. (2013). Shape memory effect and properties memory effect of polyurethane. Journal of Applied Polymer Science, 128(5), 3240-3249.
  13. Fitoussi, J., Bocquet, M., & Meraghni, F. (2013). Effect of the matrix behavior on the damage of ethylene-propylene glass fiber reinforced composite subjected to high strain rate tension. Composites Part B: Engineering, 45(1), 1181-1191.
  14. François-Heude, A., Richaud, E., Leprovost, J., Heninger, M., Mestdagh, H., Desnoux, E., & Colin, X. (2013). Real-time quantitative analysis of volatile products generated during solid-state polypropylene thermal oxidation. Polymer Testing, 32(5), 907-917.
  15. Gaudillière, C., Ranc, N., Larue, A., Maillard, A., & Lorong, P. (2013). High speed blanking: An experimental method to measure induced cutting forces. Experimental Mechanics, 53(7), 1117-1126
  16. Gay, E., Berthe, L., Buzaud, E., Boustie, M., & Arrigoni, M. (2013). Shock adhesion test for composite bonded assembly using a high pulsed power generator. Journal of Applied Physics, 114(1)
  17. Gharbi, M., Peyre, P., Gorny, C., Carin, M., Morville, S., Le Masson, P., Fabbro, R. (2013). Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a ti-6Al-4V alloy. Journal of Materials Processing Technology, 213(5), 791-800.
  18. Gilormini, P., & Teyssèdre, H. (2013). On using the levelling of the free surface of a newtonian fluid to measure viscosity and navier slip length. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469(2160).
  19. Girardot, J., Schneider, M., Berthe, L., & Favier, V. (2013). Investigation of delamination mechanisms during a laser drilling on a cobalt-base superalloy. Journal of Materials Processing Technology, 213(10), 1682-1691.
  20. Hafsaoui, S. L., Mahmoud, R., Farzaneh, S., & Tcharkhtchi, A. (2013). Study of polyamide 12 crystallization behavior within rotational molding process. Iranian Polymer Journal (English Edition), 22(3), 187-197.
  21. Hajrya, R., & Mechbal, N. (2013). Principal component analysis and perturbation theory-based robust damage detection of multifunctional aircraft structure. Structural Health Monitoring, 12(3), 263-277.
  22. Jebahi, M., Charles, J., Dau, F., Illoul, L., & Iordanoff, I. (2013). 3D coupling approach between discrete and continuum models for dynamic simulations (DEM-CNEM). Computer Methods in Applied Mechanics and Engineering, 255, 196-209.
  23. Laamouri, A; Sidhom, H; Braham, C  (2013) Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316L stainless steel ground surfaces: Experimental and numerical approaches  International Journal of Fatigue, 48, 109-121.
  24. Liu, D., Wang, P., Wei, G., Dong, W., Hui, F. (2013). Removal of algal blooms from freshwater by the coagulation-magnetic separation method Environmental Science and Pollution Research, 20 (1),  60-65.
  25. Luo, Y., Chevalier, L., Utheza, F., & Monteiro, E. (2013). Numerical simulation of the thermodependant viscohyperelastic behavior of polyethylene terephthalate near the glass transition temperature: Prediction of the self-heating during biaxial tension test. Polymer Engineering and Science, 53(12), 2683-2695
  26. Makhlouf, K., Sidhom, N., Khlifi, A., Sidhom, H., & Braham, C. (2013). Low cycle fatigue life improvement of AISI 304 by initial and intermittent wire brush hammering. Materials and Design, 52, 1088-1098.
  27. Marcadon, V., Brown, D., Hervé, E., Mélé, P., Albérola, N.D., Zaoui, A. (2013). Confrontation between Molecular Dynamics and micromechanical approaches to investigate particle size effects on the mechanical behaviour of polymer nanocomposites. Computational Materials Science, 79, 495-505.
  28. Marciszko, M., Baczmański, A., Wierzbanowski, K., Wróbel, M., Braham, C., Chopart, J. -. Zazi, N. (2013). Application of multireflection grazing incidence method for stress measurements in polished al-mg alloy and CrN coating. Applied urface Science, 266, 256-267.
  29. Marciszko, M., Baczmański, A., Wróbel, M., Seiler, W., Braham, C., Donges, J., , K. (2013). Multireflection grazing incidence diffraction used for stress measurements in surface layers. Thin Solid Films, 530, 81-84.
  30. Merckel, Y., Diani, J., Brieu, M., & Caillard, J. (2013). Constitutive modeling of the anisotrpic behavior of mullins softened filled rubbers. Mechanics of Materials, 57, 30-41.
  31. Merckel, Y., Diani, J., Brieu, M., & Caillard, J. (2013). Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon-black filled styrene butadiene rubbers. Journal of Applied Polymer Science, 129(4), 2086-2091
  32. Miquelard-Garnier, G., Guinault, A., Fromonteil, D., Delalande, S., & Sollogoub, C. (2013). Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties. Polymer (United Kingdom), 54(16), 4290-4297.
  33. Muránsky, O., Daymond, M. R., Bhattacharyya, D., Zanellato, O., Vogel, S. C., & Edwards, L. (2013). Load partitioning and evidence of deformation twinning in dual-phase fine-grained zr-2.5%Nb alloy. Materials Science and Engineering A, 564, 548-558.
  34. Ranc, N., & Chrysochoos, A. (2013). Calorimetric consequences of thermal softening in johnson-cook's model. Mechanics of Materials, 65, 44-55.
  35. Richaud, E., Fayolle, B., Verdu, J., & Rychlý, J. (2013). Co-oxidation kinetic model for the thermal oxidation of polyethylene-unsaturated substrate systems. Polymer Degradation and Stability, 98(5), 1081-1088.
  36. Riquet, A., Delattre, J., Vitrac, O., & Guinault, A. (2013). Design of modified plastic surfaces for antimicrobial applications: Impact of ionizing radiation on the physical and mechanical properties of polypropylene. Radiation Physics and Chemistry, 91, 170-179.
  37. Riviere, S., Khelladi, S., Farzaneh, S., Bakir, F., & Tcharkhtchi, A. (2013). Simulation of polymer flow using smoothed particle hydrodynamics method. Polymer Engineering and Science, 53(12), 2509-2518.
  38. Sarrabi, S., Boyer, S. A. E., Lacrampe, M. F., Krawczak, P., & Tcharkhtchi, A. (2013). Metallocene polypropylene crystallization kinetic during cooling in rotational molding thermal condition. Journal of Applied Polymer Science, 130(1), 222-233.
  39. Seiler, W., Nistor, M., Hebert, C., & Perrière, J. (2013). Epitaxial undoped indium oxide thin films: STRUCTURAL and physical properties. Solar Energy Materials and Solar Cells, 116, 34-42.
  40. Serror, M., Colin, X., & Larché, J. (2013). Thermal ageing of a carbon/epoxy composite rod. analysis of damage and its consequences on mechanical properties. [Vieillissement thermique d'un jonc composite carbone/époxy Analyse de l'endommagement et ses conséquences sur les propriétés mécaniques] Revue Des Composites Et Des Materiaux Avances, 23(1), 51-67.
  41. Sidhom, H., Ghanem, F., Amadou, T., Gonzalez, G., & Braham, C. (2013). Effect of electro discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance. International Journal of Advanced Manufacturing Technology, 65(1-4), 141-153.
  42. Terekhina, S., Mille, M., Fayolle, B., & Colin, X. (2013). Oxidation induced changes in viscoelastic properties of a thermostable epoxy matrix. Polymer Science - Series A, 55(10), 614-624.
  43. Teyssèdre, H. Gilormini, P, Régnier, G (2013) Limitations of simple flow models for the simulation of nanoimprint", International Polymer Processing 28 (1), 72-78.
  44. Teyssèdre, H., & Gilormini, P. (2013). Extension of the natural element method to surface tension and wettability for the simulation of polymer flows at the micro and nano scales. Journal of Non-Newtonian Fluid Mechanics, 200, 9-16.
  45. Teyssèdre, H., Gilormini, P., Landis, S., & Régnier, G. (2013). Legitimate domain of a newtonian behavior for thermal nanoimprint lithography. Microelectronic Engineering, 110, 215-218.
  46. Tri, P. N., Domenek, S., Guinault, A., & Sollogoub, C. (2013). Crystallization behavior of poly(lactide)/poly(β-hydroxybutyrate)/talc composites. Journal of Applied Polymer Science, 129(6), 3355-3365.
  47. Verdu, J., Zoller, A., & Marcilla, A. (2013). Plastisol foaming process. decomposition of the foaming agent, polymer behavior in the corresponding temperature range and resulting foam properties. Polymer Engineering and Science, 53(8), 1712-1718
  48. Verdu, J., Zoller, A., & Marcilla, A. (2013). Plastisol gelation and fusion rheological aspects. Journal of Applied Polymer Science, 129(5), 2840-2847.
  49. Voisembert, S., Mechbal, N., Riwan, A., & Aoussat, A. (2013). Design of a novel long-range inflatable robotic arm: Manufacturing and numerical evaluation of the joints and actuation. Journal of Mechanisms and Robotics, 5(4)
  50. Xu, F., Li, X., Regnier, G., & Defauchy, D. (2013). Coalescence modeling and experimental validation of sintering of thermoplastic polyamide fibers. Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 29(3), 177-181.